Shower Upgrade 101 - Top Tips For New Unit Installation

Shower Upgrade 101 - Top Tips For New Unit Installation

Blog Article

Instant Quote

How do you really feel when it comes to How to Install a Direct-to-Stud Shower Enclosure?

An effective shower setup requires mindful planning and also a lot of job. Most of the times, you will certainly need to do 3 types of jobs: framing wall surfaces, setting up the plumbing, and also completing walls.

Various Kinds Of Shower Units

Push-on Mixer: The pipe and spray parts of the push-on mixer shower system can be connected to the bathroom tap based on your demand, and the water temperature level can be readjusted through the taps. Push-on mixers are cheap as well as incredibly straightforward to set up. Nonetheless, although the hose pipe link is simple, it is quickly displaced. Furthermore, it is bothersome to adjust the temperature level.

Bath/Shower Mixer: The hose and spray of this type of shower are integrated with a bathroom mixer tap, and also the temperature can be changed through the bath faucets. It is a really low-cost alternative as well as no added plumbing is entailed. However, the bath/shower mixers likewise experience inconvenient temperature control choices.

Handbook Mixer: The hose pipe as well as spray of a hand-operated mixer shower device are a part of the wall system as well as the cold and hot water products are attached to a solitary shutoff The temperature and pressure of the water are controlled with either one or a range of handles (in extra pricey showers). Although temperature level control is much easier in manual mixer types, they are much more costly than the previously discussed mixers. They additionally call for additional plumbing of cold and hot water supply pipes.

Thermostatic Mixer: The hose and spray of this shower kind belong of the wall unit and the cold and hot water materials are attached to a solitary shutoff below also. It is total with a built-in stabiliser to self-adjust the water temperature and to stop it from coming to be too warm. Among the largest benefits of a thermostatic mixer shower kind consists of practical temperature control. However, it is the most costly of the different mixer options.

Power Shower: A power shower is a single unit having an effective electrical pump that is capable of altering both the water pressure and also temperature. This type of shower can be fitted if there is water supply from a cold water tank as well as a hot water cylinder. A power shower makes the change of both stress as well as temperature very easy. On the other hand, it disagrees for water heated up directly by the shower or where the water is provided by a mix central heating boiler under keys pressure.

Electric Shower: An electric shower is plumbed right into a keys cold water supply as well as it heats the water electrically. It is important to keep in mind that for this shower type to be mounted, the mains stress requires to be at least 0.7 kg/sq centimeters (10lb/sq in). The system allows the temperature and also pressure to be changed through a knob. Designs with temperature stabilisers are much better as they remain untouched by other faucets somewhere else in use within the house. A major drawback of electrical showers is that the control knob only permits the alternative of high temperatures at less pressure, or lower temperature levels at a higher stress. This is bothersome in the winter season when the spray is typically weak and the keys water is chillier. However, this trouble is dealt with in some models which are readily available with a winter/summer setup.

Many Common Blunders

Breaking or overlooking regional code restrictions.

Utilizing pipes that are also little.

Attaching copper to galvanized without utilizing a brass or dielectric suitable in between the two.

Not using tape or pipeline compound at threaded joints.

Uneven your fixtures when mounting them.

Not setting up an air void filling up for fixtures.

Reducing supply stub outs as well brief to set up the shutoff valves onto after the finished wall surface remains in location.

Not properly aligning tubing right into installations or quit valves. (Compeling the nut onto the compression ring at an angle when the tubing goes to an angle will certainly trigger a leak.).

When turning the water back on in your house, always run the outdoors hose shutoff or purge your commodes to hemorrhage dirt and also air from the lines. This debris can trigger troubles in your sink taps and other plumbing trim.

Preparation.

First of all, you need to pick the kind of shower that you desire to set up. It is essential to identify whether the picked shower can handling particular systems and can control a secure level of water with the central heating boiler. Most shower systems nowadays are created to be adaptable to different water pressures (such as kept warm water and also cold mains).
It is also crucial to take into account the water pressure as well as the preparation of the piping and also water drainage for the shower.

Method.

Depending on the sort of shower you want to install, the shower head have to either be suited order to prevent its contact with the water in the bath below or the base tray, or it needs to have a check shutoff.
Before beginning, it is suggested to mark the placements of the shower head and also control, and to intend the pipe-work entailed. Furthermore, the drain system to get rid of the waste water will require to be prepared. Both positions of the wire course as well as the shower button will certainly additionally need to be taken into consideration if an immediate or electrical shower device is being installed.
Utilize the direction guide supplied with the shower unit to fit the shower control.Before fitting the pipes that will provide the water to the shower system, it is important to remove the water supply. In order to safeguard the pipelines, they need to be offered a waterproof covering and also fitted with separating shutoffs. The pipes can then be hidden right into the wall surface and glued over to neaten the total appearance.
Fit the base tray, shower head, and also fittings.
Link the primary shower control to the pipes that will certainly be providing the water (This might call for a female screw thread adapter).
Reconnect the supply of water and also test the pipes for any leakages, as some might need tightening up.
If you are mounting an electrical shower, keep in mind to switch off the electrical energy supply before making any kind of electric connections. Once these connections have been made (there must be guidance within the instruction manual), the power supply can be switched back on.

Changing Water Stress to Match Your Shower.

The cold water storage tank can be lifted to a greater height (in some cases just 150mm (6inches)) by installation a solid wooden support beneath it - possibly made up of struts as well as blockboards. If you select this alternative, the primary and distribution pipelines will certainly additionally have to be raised to meet the new elevation of the reservoir.
Alternatively, a booster pump (a single pump or a dual/twin pump) can be fitted. Whichever kind is picked, it needs to be linked into the power supply in order to operate.

Piping and also Water drainage.

It is best to make use of 15mm diameter supply pipes, as well as make the go to the shower as brief and also straight as feasible so regarding keep optimal stress and minimise warmth loss. Additionally, by minimising using arm joints for pipe corners, you can reduce the resistance in the flow of the water. You can achieve this by bending the pipes instead.

Most Popular Shower Enclosure Options to Upgrade Your Bathroom

Frameless Shower Enclosures

Switching to a frameless shower enclosure can instantly add a modern feel to your bathroom. This type of shower enclosure eliminates the visual obstruction of frames, providing a seamless flow using fully customisable glass.

Since they are fully customisable, it fits all sizes and shapes of your bathroom space. You can also design it in a way suitable for an expansive spa shower.

In-line Shower Options

Another popular shower enclosure option you can use to upgrade your bathroom is an in-line shower. This type of shower installs a shower glass in-line with an adjacent wall, keeping water within the shower area.

You can have two options for in-line showers: hinged doors and sliding doors. An in-line shower with hinged doors allows you to have one glass shower door mounted on one side and open the door outwards. Meanwhile, in-line showers with sliding doors will enable you to save space but are more expensive.

Semi-Frameless Shower Enclosures

The semi-frameless shower enclosure is also an excellent shower enclosure option as it reduces the possibility of mould. Since the glass door is frameless, there’s no way soap and water will be stuck on it. But to ensure that there’s no way for mould to flourish in your bathroom, choose frameless shower enclosures instead.

Semi-frameless shower enclosures are the ideal choice if you adore the design of frameless showers but would prefer a more affordable solution. These types of shower enclosures have a range of options available by the glass manufacturing process in accordance with various height specifications.

You can also customise this type of shower enclosure. However, your options might be limited because of the standard sizes and heights.

Glass Block Shower Enclosure

If you don’t want a bathroom door and walk-in glass shower enclosures are not an option either, a glass block shower enclosure is for you. Glass blocks will allow your bathroom to access maximum daylight while having the privacy it offers. Also, glass block enclosures might require a bit more effort to clean than other enclosures, but they are durable and versatile options.

You can also be creative when using glass blocks for your bathroom. Since this type of shower enclosure is made of small glass blocks, you can easily create a unique shower enclosure shape. There are many options for thickness, styles, and colours, too.

Final Thoughts

Upgrading your bathroom with a new shower enclosure is a great way to add value to your home. Not only will it appear nice, but it will also be more functional and efficient. When choosing a shower enclosure, pick one that fits the style of your bathroom and your budget. It’s also paramount to take note of the pros and cons of each type before installation to ensure you don’t miss anything important.

https://gharpedia.com/blog/shower-enclosure-to-upgrade-bathroom/

I was shown that report on Simple ways to Install a Shower Cubicle on Your Own from an acquaintance on a different domain. Be sure to take the opportunity to distribute this blog posting if you enjoyed reading it. We truly appreciate reading our article about Simple ways to Install a Shower Cubicle on Your Own.

Additional Resources

Report this page